snekerxtop
CreateON WS THREADRIPPER PRO 7000WX
FC5 Fanless Silent 14th
akihabara liquor store
snekerxtop CreateON WS THREADRIPPER PRO 7000WX FC5 Fanless Silent 14th akihabara liquor store
 

トップ > 水冷パーツ > リザーバー > アクセサリー > aquacomputer LEAKSHIELD leak prevention system standalone

aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone
aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone aquacomputer LEAKSHIELD leak prevention system standalone
拡大画像

aquacomputer LEAKSHIELD leak prevention system standalone

リザーバーの上部に取付けることで、水冷ループ内圧を負圧にしリークを防止
圧力変化を監視し、リークの検出と冷却液の充填レベルを計算、OLEDモニタに情報表示可能
アドレッサブルRGB搭載

Product No.: 34138
商品コード : aqua34138
価格 : 税込25,080円(税抜22,800円)
数量
 

かごに入れる すぐに購入
  • お気に入りリスト
  • 商品についての問い合わせ

■製品仕様 メーカーリンク
リザーバーの上部に取付けることで、水冷ループ内圧を負圧にしリークを防止
圧力変化を監視し、リークの検出と冷却液の充填レベルを計算、OLEDモニタに情報表示可能

アドレッサブルRGB搭載、RGBpx対応

冷却液を充填・排出する場合は、専用のフィルポート付きPCIスロットブラケット(別売)が便利です
販売ページはこちら

電源供給は、付属ケーブル(長さ1m)でマザーボード上USBピンヘッダに接続することで行います
※PCスタンバイ時にも本製品を稼働させる場合は、接続するUSBピンヘッダの電源供給に関する設定を
※UEFI(BIOS)上で設定する必要があります


付属ケーブル(長さ1m)でマザーボード上USBピンヘッダに接続
専用ソフトウェア「aquasuite」を使用してモニタリングが可能
「aquasuite」はメーカーサイトよりダウンロード(ドイツ語)
※Windows用
※ソフトウェアの操作方法につきましてはサポート出来ません。ご購入者様ご自身にてお調べ下さい。

注意事項:
1. 本製品はリザーバー内の空気圧を制御する製品のため、リザーバー内の空気が触れるように設置して下さい
2. ループ内が負圧になるため、厚みの少ないソフトチューブを使用するとチューブが潰れる恐れがあります
 対応チューブ:
 ・PVC(塩化ビニール)製のソフトチューブは外径が内径の1.5倍以上のもの
 ・PUR(ポリウレタン)製のソフトチューブは外径が内径の1.2倍以上のもの
 ・ハードチューブ


その他LEAK SHIELDの使い方・注意点等については、以下のユーザーマニュアル及びFAQ(PDF, 英語)をご一読下さい
ユーザーマニュアル(PDF)
LEAK SHIELD FAQ (PDF)


Product No.: 34138


Leak prevention
LEAKSHIELD generates a negative pressure in the whole coolant loop, therefore in case of a leak, coolant cannot exit the system, but ambient air is sucked into the system. In order to ensure that there is a negative pressure everywhere in the system, the amount of negative pressure can be adjusted depending on the installed coolant pump.
If air does indeed enter the system, an integrated vacuum pump of LEAKSHIELD removes it from the system to maintain the negative pressure. Only in case of massive leaks, for example a completely separated tube, may coolant exit the cooling system.

Fill level measurement
By monitoring changes in pressure and the volume of pumped air, LEAKSHIELD can precisely calculate the current fill level of the reservoir.

Leak tester
Even before the cooling system is started up for the first time, LEAKSHIELD can be used to check the system for leaks. In leak tester mode, a negative pressure is generated in the system and then monitored for changes in pressure. An integrated, highly accurate pressure sensor in LEAKSHIELD continuously monitors changes in pressure, the leak rate also can be displayed in ml/h. Even minuscule pressure changes are detected, enabling detection of very small leaks.

Filling and topping up of coolant
Instead of pouring coolant into the reservoir, negative pressure generated by LEAKSHIELD can be used to suck coolant directly from a coolant container using an optional suction line. Splashing and spills while filling are effectively prevented.

OLED display, RGB illumination, USB interface, alarm buzzer and alarm output
Current status and sensor data can be checked on the OLED display of LEAKSHIELD. The display can be freely rotated by 360 degrees. Integrated, digital RGB LEDs can visualize current status or be freely configured to match your personal preferences.
Using the USB interface of LEAKSHIELD and the aquasuite Software, all data can be checked on the computer, additionally hardware data available in the aquasuite can be transmitted to the device and displayed on the OLED display.
In case configurable alarm thresholds are exceeded, an integrated alarm buzzer is activated. Alarm messages will also be shown on the OLED display, the integrated RGB LEDs provide another visual indication. For emergency shutdown of the PC, LEAKSHIELD can send USB keyboard commands. Furthermore, an alarm signal header can be connected to the motherboard's power switch header using optional accessories not included in delivery.

LEAKSHIELD demonstration video


FAQ list
You will find more detailed information on the function and setup of LEAKSHIELD here.

Technical details:
Dimensions without mounting bracket: approx. 72 x 77 x 36 mm
Dimensions with mounting bracket: approx. 140 x 82 x 46 mm
Connection thread size: G1/4
Generated negative pressure: max. -450 mbar
Supply voltage: 5 V DC via USB
Current consumption: max. 500 mA
Display: 128 x 64 pixels OLED

Scope of delivery:
- LEAKSHIELD Standalone
- Stainless steel bracket
- Mounting material
- One internal USB cable, length approx. 100 cm

System requirements:
- Windows 8.1 or newer
- Internal USB 2.0 port

Notes on the aquasuite software:
When you activate this product you will receive the current version of the aquasuite software including an upgrade service for at least eighteen (18) months. After expiration of the upgrade service you may use and reinstall the latest version available during the upgrade period without a time limit.
The update service can optionally be extended or renewed at any time for a fee.
Please note that an internet connection is required for the installation and activation of the aquasuite software.
Further information about the update service and the activation of the aquasuite software can be found here.

Prerequisites for usage
All components in the cooling system must be qualified for the configured negative pressure. Especially soft, thin walled tubes are not suitable.
LEAKSHIELD must be installed above the reservoir and be connected to the top of the reservoir. This requires a vacant port in the top of the reservoir. The tube connecting reservoir and LEAKSHIELD should be installed in a straight line, inner tube diameter should be at least 8 mm - liquid in this tube must flow back into the reservoir automatically by force of gravity.
 

[保証に関して]
保証に関しては初期不良期間10日のみとなっております。
お客様のご都合による商品のご返品は受付ておりませんのでご注意下さい。
オリオスペックのご案内
  • STEP1
    商品をカートに入れる

    お気に入りの商品を
    カートに入れます。

  • STEP2
    レジへ進む

    カート画面で
    商品と金額を確認し
    レジへ進みます。

  • STEP3
    お客様情報を入力

    ご住所・連絡先など
    お買い物に必要な情報
    を入力します。

  • STEP4
    お支払方法の選択

    ご希望の決済方法を
    お選び下さい。

  • STEP5
    内容を再確認し完了

    ご注文内容を再確認し
    お手続きを完了します。

  • STEP6
    商品の発送

    ご注文の商品を発送します。
    商品の到着をお待ち下さい。
    在庫あり商品のみ
    15時までのご入金で
    即日発送いたします。

お支払方法について
銀行振込

朝日信用金庫 湯島支店 普通 0319324 ユ)オリオスペック
PayPay銀行 本店営業部 普通 5691217 ユ)オリオスペック
三井住友銀行 神田支店 普通 7981913 ユ)オリオスペック

クレジット決済

各種クレジットカード決済をお選び頂けます。
一括払いの他分割払い、リボ払いがご利用頂けます。
ご利用可能なカード及びお支払方法は下記の通りです。

pay払い

amazon PayやLINE Pay、PayPayで決済が可能になります。

コンビニ決済

各種コンビニがご利用できます
現金でのお支払いのみ

店舗引取

秋葉原の店舗で商品のお引き渡しが可能です。
ご注文頂く際に配送方法選択時【店頭引取】の欄にチェックを入れてください。

返品について

お客様都合の返品・交換は一切受け付けておりません。
ご購入される前に商品の規格・仕様等をよくご確認頂きますようお願い致します。
当店都合による商品相違、破損の場合は、
商品到着7日以内に当店までご連絡の上、商品をご返送ください。
在庫状況を確認後、新品、または同等品と交換させていただきます。
この場合の往復の送料は、当店負担とさせていただきます。

代金引換

・現金
・宅急便コレクト【お届け時カード払い】

購入金額 (送料含む) 代金引換手数料
¥1〜¥10,000       ¥330
¥10,001〜¥30,000    ¥440
¥30,001〜¥100,000    ¥660
¥100,001〜¥300,000 ¥1,100

   
分割払い(ショッピングクレジット)

ショッピングクレジットはクレジットカードをご利用いただかない分割払いの方法です。
分割払い(ショッピングクレジット)は「株式会社ジャックス」
とのご契約が必要となります。



配送について

ヤマト運輸でのお届けになります。
送料など詳細についてはこちら

Copyright (c) OLIOSPEC all rights reserved.OLIOSPEC