snekerxtop
CreateON WS THREADRIPPER PRO 7000WX
FC5 Fanless Silent 14th
akihabara liquor store
snekerxtop CreateON WS THREADRIPPER PRO 7000WX FC5 Fanless Silent 14th akihabara liquor store
 

トップ > 水冷パーツ > ラジエター > 12cmファン用ラジエター > 480 (ファン4個) > EK WaterBlocks EK-Quantum Surface X480M - Black

EK WaterBlocks EK-Quantum Surface X480M - Black

12cmファン用ラジエター、480サイズ(ファン×4基)
接続口: G1/4" x5 (2ポートと側面2ポートのマルチポート仕様 + エア抜き用1ポート)
厚さ: 58mm
サイドフレームカラー: Black

商品コード : EK-Surface-X480M-B
価格 : 税込41,063円(税抜37,330円)
数量    売り切れ
 

  • お気に入りリスト
  • 商品についての問い合わせ
■製品仕様  メーカーリンク

12cmファン用ラジエター、480サイズ(ファン×4基)
接続口: G1/4" x5 (2ポートと側面2ポートのマルチポート仕様 + エア抜き用1ポート)
サイズ: 525 x 130 x 58mm (L x W x H)
サイドフレームカラー: Black

インストレーションマニュアル(PDF)


Details
 

For those who demand the most cooling power out of an EK-Quantum Surface radiator, the 58mm-thick X Series is the right choice. These thick radiators will benefit the most from medium and high-speed fans or even a Push/Pull setup. Equipped with a total of four G1/4“ threaded connection ports, the X Series provides additional versatility during the loop planning process. The fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of sixteen 2mm wide copper tubes across the entire radiator ensure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer and air resistance. EK doesn't recommend using slow-running fans on X Series EK-Quantum Surface radiators as they require adequate airflow to remove more heat than they absorb in their thick core.


EK-Quantum Surface premium radiators are built upon years of development and market research to deliver the best product that the market demands in every possible way. The finish of the materials, mechanical rigidity, and performance have all been brought to another level. Like all other Quantum Line products, EK’s brand new Surface radiators bring numerous performance improvements, including thermal performance, coolant flow restriction, and airflow restriction. 


With the supplied screws, this radiator is compatible with 120mm fans that have a standard 25mm thickness. EK recommends using EK fans or similar ones with sealed-edge frames. This classic yet effective square shape of the fan casing provides optimal performance in either the pull (suction) or push (pressure) regime without any hydraulic losses, thus ensuring the optimal cooling capacity of your liquid cooling radiators. 


Thick, extruded aluminum end caps with a contrasting silver finish give the radiator a premium look and feel. They cover the internals and join the stamp-pressed side plates, creating a rigid structure that is pleasant to handle. The stainless-steel side plates are coated with durable semi-gloss black paint, while the fins themselves have a special black matte coating with a high thermal conductivity coefficient. 



Multiport – The Choice of Ports is Yours

Set into the aluminum accent end caps are modular plugs and extenders that can be interchanged and configured by the user for optimal tube routing. This multiport radiator has two additional G1/4“ threaded connection ports on the side and one extra port on the opposing end for air bleeding.  

M4 Screws – Standardized, Easy to Find 

Hard-wearing black M4 Philips round-headed screws are supplied for ease of use. In general use case scenarios, EK strongly suggests using only the included screws to avoid damage to the radiator itself. However, M4 screw compatibility allows the users to source longer screws if necessary. The cooling core is designed to cause no detrimental damage to the structural integrity of the radiator core even if the customer uses longer screws accidentally, as they will collide only with the fins. 

Easy Disassembly – DIY Modding Dream 

The EK-Quantum Surface range was designed and executed as a modular product range rather than individually sized radiators. Such a design achieves immaculate fitment and continuity in appearance while at the same time making the disassembly process very easy and straightforward. Catering to the DIY modding community is something EK has always been supporting, so painting and modifying your Surface radiator will be a breeze.  

Loop Friendly – Don't Worry About Your Pump 

The internal structure design of the radiators was executed with low flow restriction in mind, providing no unnecessary stress on the rest of the cooling loop. This means you will be able to add multiple radiators to your cooling loop using only a single pump (D5 or DDC). The radiators are also airflow-friendly and low-restriction, allowing lower fan speed operation to achieve the same performance. Low airflow restriction keeps the case well ventilated and allows other radiators in the case to breathe properly.   

EK-Matrix7 Compatible – For the Cleanest Tube Runs 

Since any custom liquid-cooling loop is built from multiple EK products, the most valuable distinction in aesthetics and ease of use comes from the sum of all the parts. To address this, EK initiated Matrix7, a system that standardizes products’ dimensions, as well as port position and spacing. In so doing, we are making the liquid cooling loop assembly more intuitive and having a clean set of parallel tubing runs easier than ever before. 
 

All EK-Quantum Surface radiators are EK-Matrix7 compatible, which means they effortlessly integrate with Reflection², the second generation of Quantum distro plates. This enables the user to easily swap and upgrade between S, P, and X series Surface radiators within the same case (provided the case supports thicker radiators in the same position). 


Technical and Material Specifications:

- High-grade 99.9% copper fins  
- Copper H90 tubing 
- Brass H62 end tank chambers 
- Stainless Steel side plates 
- Extruded Aluminum Silver anodized end piece covers 
- Brass nickel-plated extenders and plugs 


Dimensions: 525 x 130 x 58mm (L x W x H)
Weight: 2.57kg
FPI: 18
Port threads: 5x G1/4"  
Fan compatibility: 120x120x25mm fan
Pressure tested: 1bar  


Enclosed: 

- EK-Quantum Surface X series radiator
- 16x Phillips Slotted M4x30mm for 25mm thick fans 
- 16x Phillips Slotted M4x5mm for mounting the radiator directly to the case 
- 6mm steel Allen (Hex) Key
- 9mm steel Allen (Hex) Key


Designed and Engineered in Slovenia
Made in China
 

PLEASE NOTE:

・Use of the improperly long screws may result in piercing of the radiator core and irreparably damage the product. Such misuse is not covered by the product warranty!
・This product should NOT be installed with any aluminum parts!
 

[保証に関して]
初期不良期間10日のみとなっております。
お客様のご都合による商品のご返品は受付ておりませんのでご注意下さい。
オリオスペックのご案内
  • STEP1
    商品をカートに入れる

    お気に入りの商品を
    カートに入れます。

  • STEP2
    レジへ進む

    カート画面で
    商品と金額を確認し
    レジへ進みます。

  • STEP3
    お客様情報を入力

    ご住所・連絡先など
    お買い物に必要な情報
    を入力します。

  • STEP4
    お支払方法の選択

    ご希望の決済方法を
    お選び下さい。

  • STEP5
    内容を再確認し完了

    ご注文内容を再確認し
    お手続きを完了します。

  • STEP6
    商品の発送

    ご注文の商品を発送します。
    商品の到着をお待ち下さい。
    弊社営業日に在庫あり商品
    のみ15時までのご入金で
    即日発送いたします。

お支払方法について
銀行振込

朝日信用金庫 湯島支店 普通 0319324 ユ)オリオスペック
PayPay銀行 本店営業部 普通 5691217 ユ)オリオスペック
三井住友銀行 神田支店 普通 7981913 ユ)オリオスペック

クレジット決済

各種クレジットカード決済をお選び頂けます。
一括払いの他分割払い、リボ払いがご利用頂けます。
ご利用可能なカード及びお支払方法は下記の通りです。

pay払い

amazon PayやLINE Pay、PayPayで決済が可能になります。

コンビニ決済

各種コンビニがご利用できます
現金でのお支払いのみ

店舗引取

秋葉原の店舗で商品のお引き渡しが可能です。
ご注文頂く際に配送方法選択時【店頭引取】の欄にチェックを入れてください。

返品について

お客様都合の返品・交換は一切受け付けておりません。
ご購入される前に商品の規格・仕様等をよくご確認頂きますようお願い致します。
当店都合による商品相違、破損の場合は、
商品到着7日以内に当店までご連絡の上、商品をご返送ください。
在庫状況を確認後、新品、または同等品と交換させていただきます。
この場合の往復の送料は、当店負担とさせていただきます。

代金引換

・現金
・宅急便コレクト【お届け時カード払い】

購入金額 (送料含む) 代金引換手数料
¥1〜¥10,000       ¥330
¥10,001〜¥30,000    ¥440
¥30,001〜¥100,000    ¥660
¥100,001〜¥300,000 ¥1,100

   
分割払い(ショッピングクレジット)

ショッピングクレジットはクレジットカードをご利用いただかない分割払いの方法です。
分割払い(ショッピングクレジット)は「株式会社ジャックス」
とのご契約が必要となります。



配送について

ヤマト運輸でのお届けになります。
送料など詳細についてはこちら

Copyright (c) OLIOSPEC all rights reserved.OLIOSPEC