snekerxtop
CreateON WS THREADRIPPER PRO 7000WX
FC5 Fanless Silent 14th
akihabara liquor store
snekerxtop CreateON WS THREADRIPPER PRO 7000WX FC5 Fanless Silent 14th akihabara liquor store
 

トップ > 水冷パーツ > 水冷ブロック > VGA用 > ブロック本体 > NVIDIA GeForce RTX 40x0 > 【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi

【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi 【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi 【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi 【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi
【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi 【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi 【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi 【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi
拡大画像

【取寄せ商品:納期要確認】 EK WaterBlocks EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB - Nickel + Plexi

ASUS ROG Strix/TUF RTX 4080 ビデオカード向け水冷ブロック
バックプレート付属
3pin 5V アドレッサブルRGB(D-RGB) LED搭載、アクリル樹脂製トップカバー
対応VGA型番は詳細ページ記載の互換性サイトで確認ください

商品コード : EK-Vector2-Strix/TUF4080-DRGB-NP
価格 : 税込62,777円(税抜57,070円)
取寄せ商品:納期要確認
数量
 

かごに入れる すぐに購入
  • お気に入りリスト
  • 商品についての問い合わせ
■製品仕様  メーカーリンク

ASUS ROG Strix / TUF RTX 4080 ビデオカード向け水冷ブロック
3pin 5V アドレッサブルRGB(D-RGB) LED搭載
アクリル樹脂製トップカバー
対応型番はEKの互換性サイトにてご確認ください

VGAの型番から対応するEK製水冷ブロックを探す場合はこちらが便利です

Water Block本体: 銅製ベースプレート(ニッケルメッキ仕上)・アクリル樹脂製トップカバー
ブラックカラーのバックプレート付属
フィッティング接続口:G1/4
※フィッティングは別売

ご注意事項:
・RGBケーブルは、必ず3pin 5V デジタル(アドレッサブル)RGB コネクタに接続して下さい
 12V 4pin RGBコネクタに接続すると故障しますのでご注意下さい

インストレーションマニュアル(PDF)


メーカー保証:2年


Details

  
High-Performance GPU Cooling

The new Vector² water blocks effortlessly solve the issue of excessive heat generation during high load on the GPU core, voltage regulation module, and the GDDR6X VRAM of the ROG Strix and ASUS TUF RTX 4080 Graphic cards.
 

GPU water block for ROG Strix and ASUS TUF 4080 GPUs


Backplate Included

The package now contains:

・A high-performance GPU water block of the latest generation
・Premium quality CNC-machined backplate
・Mounting mechanism
・Thermal paste
・Thermal pads
・Custom-made Dual-Slot GPU Bracket
・GPU and PCI power cable release tool

A black, full-coverage backplate is included with the GPU water block. Its distinctive L-shaped profile encloses the entire GPU while, at the same time, increasing the cooling surface area. The backplate also comes with pre-installed captive backplate screws that simplify the installation. They ensure that the correct size screw is always used where it is needed.


Technical and Visual Master Piece

The look of the next-gen water blocks is dominated by minimalistic straight lines. An 11mm thick copper cold plate is used for all Vector² GPU water blocks. For Plexi versions, D-RGB Lighting is now deployed on the longest edge of the water block for improved fidelity and brightness from every viewing angle. The LED PCB is concealed inside a clean aluminum extrusion. 


EK-Matrix7 Support - For Easier Loop Assembly and Straight Lines

Matrix7 standardizes the dimensions of the products, including the port position and spacing, making liquid cooling loop assembly more intuitive and easier. EK-Quantum Vector² GPU cooling enclosures follow the EK-Matrix7 standard, making them seamlessly integrate with EK-Quantum Reflection² distribution plates. This brings compatibility with the EK vertical GPU mount l perfect alignment of ports in both horizontal and vertical positions, meaning less time used for planning of the loop, bending tubes, and the end result will still be an epic build.


EK-Quantum Vector² Strix/TUF RTX 4080 D-RGB - Nickel + Plexi

The EK-Quantum Vector² Strix/TUF RTX 4080 D-RGB - Nickel + Plexi GPU water block + backplate set is compatible with:

・ROG Strix and ASUS TUF GeForce RTX 4080 

For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.


New Cooling Engine - For Best Cooling In Every Scenario

The Vector water block actively cools the GPU, VRAM, power stages, and passively the PCB hotspots that are found on the backside of the GPU core, VRAM, and the VRM (voltage regulation module) through the backplate.


The implemented Vector² cooling engine uses a novel 3D machined acrylic insert to improve flow distribution and thermal performance. This new cooling engine is based on an Open Split-Flow design, but the asymmetric shape of the jet insert helps distribute an even flow between the first and last copper fins. The fin structure geometry has been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. It is also characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance.
 

Vector2 GPU water block for reference RTX 4080 GPU


Great care was taken to achieve a symmetrical flow domain by utilizing an internal bridge to secondary components. This was done to ensure the cooling of secondary components without sacrificing flow distribution over the GPU core.


Premium Materials and Clever Engineering for Longevity and Top Performance

All Vector² GPU water blocks use a thick 11mm copper coldplate with an acetal terminal attached directly to it to create a robust assembly. A single o-ring design is used to create a seal between the cold plate and the water block top, reducing the number of failure points. This also means that you have seen the end of stainless steel bridge plates that were utilized on GPU water blocks before. This simple construction provides confidence during customization and maintenance. Tactile magnetic covers are used to conceal the terminal screws, which allows rotation of the branding when the GPU is inverted in the case.


The cold plate is CNC-machined out of high-quality, pure electrolytic copper which is then nickel-plated, while its top is CNC-machined out of glass-like cast acrylic. The black anodized backplate has a new L-shaped profile that touches the base of the water block and encloses the entire GPU while increasing the cooling surface leading to even better performance. 
 

Included Backplate

For the first time, captive backplate screws are added to the backplate. They simplify installation, ensuring the correct length is always used where it is needed to avoid any user error or second-guessing.


The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the backside of the printed circuit board VRM, core, and VRAM sections.


Rotatable Magnetic Covers

Sleek magnetic covers are used to conceal the terminal screws, which allows rotation of the branding when the GPU water block and active backplate enclosure are inverted in the case or being used on a vertical GPU mount.
 

Vector2 GPU water block for reference RTX 4080 GPU

Addressable D-RGB Compatibility

Addressable D-RGB LED lighting is deployed on the longest edge of the water block for improved uniformity and brightness. The PCB and diodes are concealed inside a clean aluminum extrusion. The individually addressable RGB LED is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header (Pinout: +5V | Data | Blocked | Ground).

EK Vector RGB compatibility

Vector² Water Blocks Won an iF Design Award

EK’s premium water blocks from the Quantum Vector² product line boasts an iF Design Awards for 2022. These prestigious awards signify top-tier design levels delivered by our products to both consumers and the design community. Not only do Vector² water blocks have aesthetically pleasing looks to deserve these awards, but they also bring patent-pending technologies and valuable features to the table.
 

iF Awards 2022

Technical Specification:

- Dimensions (L x H x W): : 260 x 153 x 27mm
- D-RGB LED count: 12
- D-RGB cable length: 50cm
- D-RGB connector 3-pin 5V digital LED header (Pinout: +5V | Data | Blocked | Ground)
 

Made in Slovenia - Europe!


PLEASE NOTE:

・Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
・Factory backplates are not compatible with this water block!
・This product should NOT be installed with any aluminum Fluid Gaming parts!
・The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel-plated water block! EK is offering a selection of such products in the coolants section.
 

VGA用フルカバー ウォーターブロック装着時にご注意下さい
VGA用フルカーバー水枕は各機種ごとに個別に作られていますがリファレンス基盤の標準的な配置を元に製造設計されております。
これは固定ネジの配置や各チップの位置が同じと言うだけでありチップキャパシタやチップレジスターは実際にカードを製造するメーカーによって採用しているパーツが違い高さなどが微妙に異なる可能性がありカードによってはチップパーツが水枕に接触する可能性があります。
従いまして水枕をVGAカードに装着する時には不必要な箇所の接触が無いかを必ず確認して下さい、接触が有る場合はその部分を削る必要がございますので予めご了承下さい


特記事項
EK Waterblocks製Full Cover水枕にてベースプレート側の取り付けねじ穴が緩かったり位置がすれている等の場合は固定ネジを無理にねじ込まないで直ぐに当店へご連絡下さい、 無理にねじ込んだ結果ねじ穴のメッキが剥がれた場合はねじ穴不良のメーカー保証が無くなります(メーカはメッキが剥がれた事で無理にねじ込んだと判断して います、当店でも保証致しかねます)。装着前にまず規定のネジがスムーズにねじ込めるかを確認の後に装着作業を始めて下さいます様お願い致します。


[保証に関して]
初期不良対応期間はお客様の手元に到着した日より10日間となります。
初期不良期間を過ぎた場合には、一ヵ月程度の交換期間がかかる場合がありますのでご了承下さい
お客様のご都合による商品のご返品は受付ておりませんのでご注意下さい。

オリオスペックのご案内
  • STEP1
    商品をカートに入れる

    お気に入りの商品を
    カートに入れます。

  • STEP2
    レジへ進む

    カート画面で
    商品と金額を確認し
    レジへ進みます。

  • STEP3
    お客様情報を入力

    ご住所・連絡先など
    お買い物に必要な情報
    を入力します。

  • STEP4
    お支払方法の選択

    ご希望の決済方法を
    お選び下さい。

  • STEP5
    内容を再確認し完了

    ご注文内容を再確認し
    お手続きを完了します。

  • STEP6
    商品の発送

    ご注文の商品を発送します。
    商品の到着をお待ち下さい。
    在庫あり商品のみ
    15時までのご入金で
    即日発送いたします。

お支払方法について
銀行振込

朝日信用金庫 湯島支店 普通 0319324 ユ)オリオスペック
PayPay銀行 本店営業部 普通 5691217 ユ)オリオスペック
三井住友銀行 神田支店 普通 7981913 ユ)オリオスペック

クレジット決済

各種クレジットカード決済をお選び頂けます。
一括払いの他分割払い、リボ払いがご利用頂けます。
ご利用可能なカード及びお支払方法は下記の通りです。

pay払い

amazon PayやLINE Pay、PayPayで決済が可能になります。

コンビニ決済

各種コンビニがご利用できます
現金でのお支払いのみ

店舗引取

秋葉原の店舗で商品のお引き渡しが可能です。
ご注文頂く際に配送方法選択時【店頭引取】の欄にチェックを入れてください。

返品について

お客様都合の返品・交換は一切受け付けておりません。
ご購入される前に商品の規格・仕様等をよくご確認頂きますようお願い致します。
当店都合による商品相違、破損の場合は、
商品到着7日以内に当店までご連絡の上、商品をご返送ください。
在庫状況を確認後、新品、または同等品と交換させていただきます。
この場合の往復の送料は、当店負担とさせていただきます。

代金引換

・現金
・宅急便コレクト【お届け時カード払い】

購入金額 (送料含む) 代金引換手数料
¥1〜¥10,000       ¥330
¥10,001〜¥30,000    ¥440
¥30,001〜¥100,000    ¥660
¥100,001〜¥300,000 ¥1,100

   
分割払い(ショッピングクレジット)

ショッピングクレジットはクレジットカードをご利用いただかない分割払いの方法です。
分割払い(ショッピングクレジット)は「株式会社ジャックス」
とのご契約が必要となります。



配送について

ヤマト運輸でのお届けになります。
送料など詳細についてはこちら

Copyright (c) OLIOSPEC all rights reserved.OLIOSPEC